logo

HYDRAULIC & ENGINE / MOBILE

Filter by

No filters selected

Port Type

Mounting Style

Port Size

Product Type

Operating Pressure

HYDRAULIC & ENGINE / MOBILE

HYDRAULIC & ENGINE / MOBILE

The SR series filters are capable of feeding filtered oil under positive pressure to the suction side of the boost pump filtering both open and closed loop oil systems through one filter.
Viewing 10 of 46
Show More

The Parker GMF Series is a highly compact, environmentally friendly inline hydraulic oil filter that features a re-usable element core. Capable of flows up to 600 L/min (158 GPM). Maximum allowable operating pressure 70 bar (1,015 psi).
Viewing 10 of 182
Show More

The IN-AGB Series is a low cost, high performance in-tank mounted return line filter featuring a quick response bypass construction with low hysteresis and a high dirt-holding capacity.
Viewing 10 of 194
Show More

The Parker 12CS/50CS Coreless Medium Pressure Spin-On Filter Series are the Smart Alternative to Spin-on Cans! An environmentally friendly solution that is engineered with the latest in Microglass technology and economical.
Viewing 10 of 21
Show More

The Parker iCountPD is a highly compact, permanently mounted laser detection particle size monitor that enables continuous monitoring of contamination levels in hydraulic and fluid circuits.Capable of communicating results in ISO4406 / AS4059 or NAS1638.
Viewing 10 of 66
Show More

The Parker PT Series Low Pressure Return Line Filters combine high efficiency Quantumfiber filtration with low cost installation. Easily removed for maintenance, this filter offers both convenience and dependability.
Viewing 10 of 20
Show More

The 100P Series high pressure in-line filters have been designed so only the end cap of the bowl needs to be removed in order to change the element making it ideal for applications where space is at a premium.
Viewing 10 of 92
Show More

Note: This product is no longer available - please refer to the “Product Support" or "Recommended products" section of this page for details on any alternative products, or contact us for further assistance.
Viewing 10 of 14
Show More

The 45M Series of medium pressure filters offer an ideal solution to the problem of protecting system components at lower pressures. The robust filter housing allows the 45M product to be applied in harsh environments.
Viewing 10 of 176
Show More

The BGT Series features pre-filtration by means of a magnet column and a full flow bypass with low hysteresis. Providing maximum flow rates of 2400 l/min at maximum pressure 10 bar.
Viewing 10 of 222
Show More

Modern mobile equipment calls for a hydraulic fluid ensuring profitable and reliable operation. The FPS monitors online Dielectric, Density, Viscosity and temperature.
Viewing 10 of 1
Show More

Note: This product is no longer available - please refer to the “Related Products” section of this page for alternative products, or contact us for further assistance.
Viewing 10 of 1
Show More

The 130 series is a range of high flow return filters for industrial use on hydraulic or lubrication systems. Flow up to 1400 l/min and pressure up to 30 bar in single units.
Viewing 10 of 160
Show More

Note: This product is no longer available.
Viewing 10 of 1
Show More

The Parker Heated Viscometer is a highly rugged and easy-to-use diagnostic device that provides oil viscosity centistoke results in minutes for fast onsite maintenance decisions. Supplied in a compact case for maximum portability.
Viewing 10 of 2
Show More

Note: This product is no longer available.
Viewing 10 of 1
Show More

Parker's Guardian Portable Transfer Unit is a hand-held unit designed to filter new fluids, and polish the existing fluids in a system to reduce contamination levels. Lightweight and compact, ideal for one person operation and on-site conditioning.
Viewing 10 of 54
Show More

The Parker AB Series comprises a broad range of top-mounted breathers and filler breathers. The filler breathers protect hydraulic systems from airborne particle ingress, while allowing sufficient airflow into and out of the fluid reservoir.
Viewing 10 of 135
Show More

The iCountMS Range is an online moisture sensor that allows for continuous monitoring of relative humidity (moisture content) in hydraulic and lubricating fluid circuits. Three models available with maximum allowable working pressures up to 420 bar.
Viewing 10 of 21
Show More

The Maxiflow Series is a range of spin-on filters designed to provide low cost quality protection for hydraulic or lubrication systems.
Maximum pressure 10 bar. Maximum flow 360 l/min.
Viewing 10 of 31
Show More

The patented Parker Moduflow™ Plus Series Low Pressure In-Line Suction/Return/Duplex Filter element features longer element life, increased dirt-holding capacity and requires fewer element changes, reducing system maintenance costs.
Viewing 10 of 131
Show More

The Tanktopper from Parker is an all-in-one, easy-to-mount return line filter solution featuring an integrated air breather for a compact and cost-effective tank design.
Viewing 10 of 276
Show More

Parker engineers have developed what soon will be the industry standard in high pressure hydraulic filtration. The 7,000 psi WPF series incorporates many advanced features designed for one reason: to improve your bottom line.
Viewing 10 of 50
Show More

The Flowline Series is a range of rugged inline mechanical flowmeters that provide visual indication of fluid flow in hydraulic systems. Capable of measuring flows ranging from 1 - 360 L/PM. Maximum allowable working pressure: 350 bar (5076 psi).
Viewing 10 of 41
Show More

The Loflow Series comprises a range of inline mechanical flowmeters that provide visual indication of fluid flow in hydraulic systems. Capable of measuring flows ranging from 0.01 – 22 LPM. Maximum allowable working pressure: 10 bar.
Viewing 10 of 7
Show More
Close [ x ]
Full Screen
350455
350455