350455
682632

XTREME+PLUS HC - Standard Size 4-In. Filter

Innovative Airguard® XTREME+Plus® High Capacity (HC) filters are the best Self-Supported Pleat on the market. The XTREME+Plus HC achieves high efficiency, extremely low pressure drop, and industry-leading dust-holding capacity.

chemicalComposition WARNING: This product can expose you to chemicals including Antimony oxide which is known to the State of California to cause cancer and toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Select attributes to refine your product search.
Description
    Innovative Airguard® XTREME+Plus® High Capacity (HC) filters are the best Self-Supported Pleat on the market. The XTREME+Plus HC achieves high efficiency, extremely low pressure drop, and industry-leading dust-holding capacity. These pleated filters save time and money because they contain no metal that will warp or deform. Instead, they consist of a 100 percent moisture-resistant beverage board frame and rugged synthetic media. Consistent pleat shape and spacing allow particulate to collect evenly over the entire surface of the media. Three pleat stabilizer straps add rigidity, and boxed pleat tips provide surface area for adhesion.
    Features/Benefits:
    • Synthetic media does not support microbial growth
    • Minimum Efficiency Reporting Value (MERV) 8 and MERV-A-8-A efficiency rating
    • More gross media area (square feet) than XTREME+Plus standard capacity filters
    • No metal for corrosion
    • Fully incinerable, environmentally friendly disposal
    • Die-cut, single-piece beverage board frame for high strength and support
    • Direct adhesion between media and frame to resist movement, bunching, and collapsing during use
    • Over 140 adhesion points between media and frame
    • 4-in. depth
    • Water gauge initial resistance of 0.15 in.
    • A total of 11.3 pleats per foot
    • Rated velocity of 500 feet per minute
    • Maintains its structural integrity even in wet or humid conditions
    Applications:
    • All standard commercial applications with normal operating environments*
    • Low and medium dust-loading industrial applications
    • Final filters for MERV 8 requirements
    • Pre-filters in multi-stage systems
    *Not for use in high temperatures or where there is high or turbulent airflow
Description

Performance Characteristics

Application

HVAC

Brand

Airguard

Product Type

Pleated Filter

Technology

Filtration

Specifications Met

Classified Per UL Standard 900 for Flammability

Depth

9.525 cm
3.75 inch

For Fluid Type

Air

Filter Efficiency Rating

MERV 8

Flow Rate

1120 to 2000 ft3/min

Height

49.53 to 62.23 cm
19.5 to 24.5 inch

Initial Resistance

0.15 Ω

Materials of Construction

Moisture Resistant Beverage Board Frame

Maximum Operating Pressure

1 inch

Maximum Operating Temperature

150 °F
66 °C

Media

Synthetic

Media Area

14.9 to 26.5 ft2

Micron Rating

≥70% on 3-10 μm

Minimum Operating Pressure

0 inch

Mounting Type

HVAC Frame Systems

Weight

0.498 to 0.775 kg
1.1 to 1.71 lb

Width

39.37 to 59.372 cm
15.5 to 23.375 inch

contact us

1.800.331.3118
2521 Commercial Drive
Auburn Hills, Michigan,
United States, 48326