Airguard® XTREME+Plus®(MERV 8) self-supported,pleated filters offer extreme durability and extended service life in applications with low and medium dust-loading conditions.Available in two thicknesses(1 or 2-in).Air flows ranging from 415–2,170 cfm.
WARNING: This product can expose you to chemicals including Antimony oxide which is known to the State of California to cause cancer and toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The XTREME+Plus® standard-capacity, self-supported pleated (SSP) air filter with Airguard® technology achieves MERV 8 mechanical efficiency and provides low pressure drop and industry-leading dust-holding capacity. The filter has over 140 adhesion points between the media and the die cut frame. The inside of the frame is completely coated with water-repellant adhesive to ensure a solid bond at all points of contact with the media pack. The pack is sealed inside the frame and pleat tips are bonded to the stabilizers and diagonal support members. This prevents movement, bunching, and collapsing during operation, which can often cause alternative filter products to fail prematurely. With no metal wire backing to warp or deform, along with a single-piece, heavy-duty beverage board frame and rugged self-supported pleat technology, the XTREME+Plus® filter is capable of maintaining its performance and structural integrity in wet or humid conditions. This saves users time and money that is often wasted on replacing damaged wire-backed filters.XTREME+Plus® pleated air filters are designed for use in commercial HVAC applications with normal operating environments and low to medium dust loading conditions. They are not recommended for use in high-temperature or turbulent-airflow environments.For XTREME+Plus® air filters with a lower initial resistance (in. w.g.), see the XTREME+Plus® HC (high-capacity).Markets:Commercial and Industrial HVACProcess Air FiltrationApplications:Air handling systemsRooftop unitsSide access housingsBuilt-up filter banksPre-filters in multi-stage systemsNot for use in high temperature environments or applications with very high or turbulent airflowBenefits:Self-supported media — no metal wire backing means no corrosion or deformation of metalConsistent pleat shape and spacing allow particulates to collect evenly over the entire surface of the media. Pleat stabilizer straps add rigidity and maintain proper pleat spacing.Over 140 adhesion points between the media and the frameAchieves MERV 8 mechanical efficiencySynthetic media is resistant to moisture, mold, and mechanical damageFully incinerable, environmentally friendly disposalFeatures:Filtration efficiency: MERV 8, MERV-A 8-ANominal thickness (in.): 1, 2Rated air velocities (fpm): 300–500Air flow rates (cfm): 415–2170Initial resistance (in.w.g.): 0.15–0.22 Final resistance (in.w.g.): 1.0Maximum operating temperature: 150 °F (65 °C) Material of construction: single-piece, moisture-resistant, beverage board frameClassified per UL 900 for flammability only