V-FORCE® filters are an excellent replacement for corrugated separator-style or supported pleat-style rigid filters.The Dynamic Double-V plastic design provides an unbeatable combination of low resistance,high dust holding capacity.

chemicalComposition WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Select attributes to refine your product search.

    V-FORCE® filters are an excellent replacement for corrugated separator-style or supported pleat-style rigid filters. The Dynamic Double-V plastic design provides an unbeatable combination of low resistance, high dust holding capacity and competitive price compared to other rigid products y feature a double-V design and all-plastic construction, so there are no metal pieces susceptible to rust and corrosion. The two V-shaped assemblies are the result of four mini-pleat media packs with glue-bead separators that enable the V-FORCE to operate at low resistance to air flow and full use of media. A wide-open entrance into the filter creates a dynamically shaped air flow pattern for minimum pressure drop and maximum energy savings.
    Importantly, the V-FORCE® is environmentally friendly. It is energy saving, fully incinerable., and exceeds Leadership in Energy and Environmental Design (LEED)/Green requirements of Minimum Efficiency Reporting Value (MERV) 13.
    • Exceeds LEED/Green requirements of MERV 13
    • All-plastic construction
    • Classified per UL Standard 900
    • 100% synthetic media
    • Moisture and chemical resistant
    • Low resistance and lower energy costs
    • Light weight
    • High dust-holding capacity
    • Corrugated separator or supported pleat styles available
    • Available in MERV 11, MERV 13, and MERV 14
    • Width and height dimensions are interchangeable – V-FORCE filters can be installed with pleats vertical or horizontal
    • Optional gaskets available for both air-inlet and air-outlet sides
    • Optional reverse air flow units available
    • Continuous Operating Temperature of 140°F (60°C)
    • High-efficiency, environmentally friendly filtration requiring corrugated separator or supported pleat designs 


Performance Characteristics





Product Type

Extended Surface Rigid Cell Filters

Specifications Met

Class 1 Filter Per U.L. Standard 900


29.21 cm
11.5 inch

For Fluid Type


Filter Efficiency Rating

MERV 11 to 14

Flow Rate

1000 to 2000 ft3/min


28.892 to 59.3725 cm
11.375 to 23.375 inch

Initial Resistance

0.25 to 0.46 Ω

Maximum Operating Pressure

1.5 inch

Maximum Operating Temperature

140 °F
60 °C



Media Area

33 to 75 ft2

Micron Rating

≥75% to ≥85% 0.3 to 1.0 μm


2.381 to 8.7 kg
5.25 to 3.946 lb


49.212 to 59.3725 cm
19.375 to 23.375 inch

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Click here to view all product safety information.

contact us

2521 Commercial Drive
Auburn Hills, Michigan,
United States, 48326