350455
682632

HEPA-MICROGUARD 99 METAL

Airguard® Micro Guard® 99 filters feature state-of-the-art engineering and design. Each filter is individually tested at the factory before shipping. Various sizes, styles, and efficiencies are offered to satisfy any filtration need.

chemicalComposition WARNING: This product can expose you to chemicals including Chromium which is known to the State of California to cause cancer and Chromium which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Select attributes to refine your product search.
Description
    Airguard® Micro Guard® 99 filters feature state-of-the-art engineering and design. Each filter is individually tested at the factory before shipping. Various sizes, styles, and efficiencies are offered to satisfy any filtration need. These options include both standard and high-capacity; gasket seal and gel seal; C-style, double-turned flange, four-piece box, and various other frames; and three different efficiencies (99.97, 99.99, and 99.999 percent on 0.3 microns).
    Micro Guard 99 utilize a unique score fold design. This channeled pleat design increases media surface area and reduces opportunities for media damage during handling and installation. Corrugated aluminum separators allow maximum media utilization, reducing risk of media puncture, adding filter pack rigidity and stability, and offering high air flow through the filter. The entire media pack is bonded to the interior of the cell sides with urethane sealant. Dovetail interlocking urethane gaskets are standard on Micro Guard 99 filters.
    Features/Benefits:
    • Cell sides: choose from particle board, fire-retardant particle board, fire-retardant plywood, galvanized steel, stainless steel, formed aluminum, or anodized aluminum
    • Wet-laid paper media produced from glass microfibers that is water-resistant and heat-resistant, with corrugated aluminum separators allowing for maximum media utilization
    • Media pack is bonded to the interior of the cell sides with urethane sealant
    • Silicone bond is used in high-temperature models 500°F (260°C)
    • Three efficiencies: 99.97, 99.99, and 99.999 percent on 0.3 microns
    • Channeled pleat design to increase media surface area and reduce media damage during handling
    • Optional expanded metal faceguards
    • Gasket seal or gel seals
    • Numerous sizes available with varying air flow capacities
    • High-temperature models available
    Applications:
    High-efficiency industrial filtration
Description

Performance Characteristics

Brand

Airguard

Product Type

High Efficiency Particulate Air Filters

Technology

Air Filter

Depth

29.21 cm
11.5 inch

For Fluid Type

Air

Filter Efficiency Rating

0.9997

Flow Rate

1000 to 2000 ft3/min

Height

30.48 to 60.36 cm
12 to 24 inch

Initial Resistance

1.00 to 1.35 Ω

Industry

Commercial and Industrial

Materials of Construction

16 Gauge Corrosion Resistant Steel, Aluminum Separators, Urethane Sealant

Maximum Operating Pressure

2.7 WG

Media

Micro-Glass Fiber

Media Area

133 to 286 ft2

Micron Rating

99.97% @ 0.3 μm

Mounting Type

HVAC Frame Systems

Weight

14.061 to 19.845 kg
31.000 to 43.750 lb

Width

59.372 to 60.96 cm
23.375 to 24 inch

  • Literature and Reference Materials

  • MICROGUARD 95 Sub-HEPA Metal Cell Filter Cut Sheet
  • MICROGUARD 95 Sub-HEPA Metal Cell Single Header Filter Cut Sheet
  • MICROGUARD 99 Standard Capacity HEPA Filter Cut Sheet
  • MICROGUARD 99 Standard Capacity HEPA Filter Specification
  • MICROGUARD HC High Capacity HEPA Filter Cut Sheet
  • MICROGUARD HC High Capacity HEPA Filter Specification
  • MICROGUARD HT High Temperature HEPA Filter Cut Sheet
  • MICROGUARD HT High Temperature HEPA Filter Specification
  • MICROGUARD LR Sub-HEPA Metal Cell Filter Cut Sheet
  • MICROGUARD LR Sub-HEPA Metal Cell Filter Specification
  • MICROGUARD LR Sub-HEPA Plastic Box Filter Cut Sheet
  • MICROGUARD LR Sub-HEPA Plastic Box Filter Specification
  • MICROGUARD LR Sub-HEPA Plastic Box Single Header Filter Cut Sheet
  • MICROGUARD LR Sub-HEPA Plastic Box Single Header Filter Specification
  • MICROGUARD OM Sub-HEPA Filter Cut Sheet
  • MICROGUARD® and MICROPLEAT™ High-Efficiency Sub-HEPA, HEPA and ULPA Filters
  • MICROPLEAT DM Mini-Pleat HEPA Ducted Filter Cut Sheet
  • MICROPLEAT DM Mini-Pleat HEPA Ducted Filter Specification
  • MICROPLEAT Mini-Pleat HEPA Filter Cut Sheet
  • MICROPLEAT Mini-Pleat HEPA Filter Specification
  • MICROPLEAT V2000 Mini-Pleat V-Bank HEPA Filter Cut Sheet
  • MICROPLEAT V2000 Mini-Pleat V-Bank HEPA Filter Specification
  • MICROPLEAT V2400 Mini-Pleat V-Bank HEPA Filter Cut Sheet
  • MICROPLEAT V2400 Mini-Pleat V-Bank HEPA Filter Specification
  • Parker MICROGUARD 95 Box Filter Specification
  • Parker MICROGUARD 95 Single Header Specification
  • Parker MICROGUARD OM Sub-HEPA Filter Specification
  • contact us

    1.800.331.3118
    2521 Commercial Drive
    Auburn Hills, Michigan,
    United States, 48326