logo

Externally Heated Desiccant Air Dryer - TWP Series

Parker Airtek TWP Series Externally Heated Desiccant Air Dryers use heat and the adsorption method to remove moisture from compressed air. Pressure dewpoint of -40°F (-40°C) and flowrate of 200 – 7500 scfm depending on model.

Select attributes to refine your product search.
Description
    Compressed air is polluted with dirt particles, water, oil, oil vapor, and condensate.  These contaminants result in high maintenance costs, premature wear, spoiled products and the failure of control systems.

    A Parker Airtek TWP Series Externally Heated Desiccant Air Dryer will effectively remove contaminants such as dirt, water, and oil. The traditional adsorption principle used in this design is simple, robust and flexible. Continuous drying is accomplished by the operation of two desiccant towers.

    Compressed air is dried through one tower while the other desiccant tower is being regenerated. The regeneration heating cycle of desiccant is accomplished using a dry air purge flow heated by an external electric heater. The regeneration cooling cycle is performed using the same flow of dry compressed air taken from the desiccant air dryer outlet to ensure continuous dewpoint performance.

    Features/Benefits
    • Flow rate starting at 200 scfm (340 m3/hr)
    • Delivered air quality is in accordance with ISO 8573.1: 2001, the international standard for compressed air quality.
    • Pressure dewpoints of -100°F (-70°C) & -40°F (-40°C) (ISO 8573.1: 2001 Classes 1 & 2) are available.
    • Parker Airtek pre- and after compressed air filters - Standard
    • PowerLoc Energy Management System* - Standard
    • Low-wattage high incoloy sheathed heater for efficient regeneration
    • High-efficiency, quiet running regenerative (up to 3000 scfm) or centrifugal blowers (4000 scfm and larger)
    • Parker non-lubricated full-flow angle seat valves, which carry a FIVE YEAR VALVE WARRANTY, are standard on dryers up to 800 scfm.
    • High performance, actuated butterfly switching valves, which carry a FIVE YEAR VALVE WARRANTY, are standard on dryers 1000 scfm and larger.
    • Insulated tower, heater and purge lines increase dryer performance and efficiency by reducing radiant heat loss plus keeps the unit with the safety parameters set forth by OSHA.
    • Easy to use Control Center affords superior dryer control along with digital telemetry for remote analysis of performance.
    • Custom filter packaging*
    • 7” HMI, Allen-Bradley® PLC
    • Flash drive port for transferring data log
    • Serial communications port (optional)
    • Emergency stop and standby mode
    • Automatic data logging 24/7, 365 days of all
    operational information

    *Optional equipment
Description

Performance Characteristics

Product Type

Desiccant, Externally Heated
Desiccant
Externally Heated
Heated

Brand

Airtek

Optional Accessories

Pre and After Filtration

Connection Type

1” NPT , 1 1/2” NPT, 1 1/2" NPT, 2" NPT, 3" Flg, 4" Flg, 6" Flg, 8" Flg

Maximum Flow Rate

170, 229, 340, 425, 510, 680, 850, 1019, 1359, 1699, 2038, 2548, 3398, 4417, 5097, 6796, 8495, 10194, 13592 m3/hour

Maximum Inlet Pressure Rating

100 psi

Maximum Operating Pressure

150, 135 psi

Minimum Operating Pressure

80 psi

Maximum Operating Temperature

120 °F

Minimum Operating Temperature

50 °F

Maximum Ambient Temperature

120 °F

Minimum Ambient Temperature

40 °F

Purge Pressure Rate

7, 9.45, 14, 17.5, 21, 28, 35, 42, 56, 70, 84, 105, 140, 182, 210, 280, 350, 420, 560

Weight

680, 720, 920, 1180, 1370, 1400, 2060, 2350, 3035, 4195, 5215, 7765, 8565, 11562, 12002, Consult Factory lb

Width

31, 40, 43, 47, 50, 52, 63, 74, 78, 96, Consult Factory inch

Depth

18, 22, 27, 28, 35, 41, 60 inch

Height

83 - 113 inch

Compatible Prefilter

JC0110-C, JC0150-C, JC0250-C, JC0350-C, JC0450-C, JC0625-C, JC0800-C, JC1000-C, JLA1603-C, JLA2100-C, JLA3200-C, JLA3206-C, Consult Factory

Compatible After Filter

JC0150-FH, JC0250-FH, JC0350-FH, JC0450-FH, JC0625-FH, JC0800-FH, JC1000-FH, JLA1800-FH, JLA2600-FH, JLA3506-FH, Consult Factory

Compatible Prefilter Element

JE-CC0110, JE-CC0150, JE-CC0350, JE-CC0450, JE-CC0625, JE-CC0800, (2) JAE3-C, (3) JAE3-C, (4) JAE3-C, Consult Factory

Compatible After Filter Element

JE-FC0150-HT, JE-FC0350-HT, JE-FC0450-HT, JE-FC0625-HT, JE-FC0800-HT, JAE4-FH, (2) JAE4-FH, (3) JAE3-FH, Consult Factory

Installed Condensate Drain Type

Timed Solenoid Drain, Demand Solenoid Drain

contact us

1.800.331.3118
2521 Commercial Drive
Auburn Hills, Michigan,
United States, 48326